Tv Menu Features And Functions - Panasonic TX-39AW304 Bedienungsanleitung

TV Menu Features and Functions

Picture Menu Contents
You can change the picture mode to suit your preference or requirements. Picture mode can be
Mode
set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Contrast
Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
To set the Power Save Mode as Eco, Picture Off and Disabled.
Power Save Mode
(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)
This setting controls the backlight level. The backlight function will be inactive if the Power Save Mode
Backlight
is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture
(Optional)
mode is set to Game
Noise If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to
Reduction reduce the amount of noise.
Advanced Settings
Dynamic
You can change the Dynamic Contrast ratio to desired value.
Contrast
Colour Temp
Sets the desired colour tone.
Sets the desired picture size from picture zoom menu.
Picture Zoom
Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)
HDMI True While watching from HDMI source, this feature will be visible in the Picture Settings menu.
Black You can use this feature to enhance blackness in the picture.
Films are recorded at a different number of frames per second to normal television
Film Mode
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
RGB Gain
You can configure the colour temperature values using the RGB Gain feature.
Reset Resets the picture settings to factory default settings.(Except Game Mode)
Autoposition
Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position (in
This item shifts the image horizontally to the right hand side or left hand side of the screen.
PC mode)
V Position (in
This item shifts the image vertically towards the top or bottom of the screen.
PC mode)
Dot Clock (in
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive
PC mode) presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the resolution and scan frequency that you input to the TV set, you may see
Phase (in PC
a hazy or noisy picture on the screen. In such a case you can use this item to get a clear
mode)
picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added
to the Picture Settings while in PC mode.
.
English - 10 -