Basic Functions; Changing Set Temperature - Mitsubishi Electric ecodan PAR-WT50R-E Bedienungsanleitung

5

Basic Functions

The following explains the basic functions available on the wireless remote controller.
<Ecodan system OFF>
● When the ecodan system is ON, hold
down buttons for 3 seconds to
display a zone no. assigned to the remote
controller.
● Failure or error on the indoor unit, the
outdoor unit, or the wireless system
When is shown all the time, this means
a failure (or error) on the indoor unit, the
outdoor unit, or the wireless system. Con-
tact your service contractor.

5.1. Changing Set Temperature

To increase set temperature: Press
To decrease set temperature: Press
● Each press of the buttons adjusts the set
temperature by 0.5°C.
● The set temperature range is from 10 to 30°C.
● When the automatic zone display is active, a
zone number assigned to the remote control-
ler is displayed for 3 seconds.
* When " " is shown, the ecodan
system cannot be operated by remote
controller.
<Ecodan system ON>
<Zone display>
<Failure>
<Temperature adjustment >
button.
button.
7