Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintainance & care
Your e-bike, just like all mechanical components, is exposed to
high usage and wear. Different materials and components may
react differently to wear and abrasion due to usage. Using a
component longer than the intended period of use may lead to sudden
failure and therefore injure the driver. Any kind of fissure, tear or color
change on those high usage parts indicates that the period of use as
expired. The according component should immediately be replaced.
Wear parts
Especially check on the following wear parts regularly:
•
Tires and tubes
•
Chain, sprocket and chain ring
•
Brake pads
•
Brake discs
•
Ball bearings
•
Saddle and grips
Inspect the right fit of every screw and nut and, if necessary, tighten them
again. Always bear in mind the correct tightening torque (s. table Tigh-
tening torque).
Lubrication
To ensure efficient functioning and a long lifetime, certain parts require
regular cleaning and lubrication. Oils, fats and other lubricants should be
meticulously kept away from rims, brakes, brake pads and brake discs.
What to lubricate
When to lubricate
chain
after cleaning, after driving
in the rain,
after about 300km
shift cable
with poor function or
1x annually
Aluminum seat post in
during installation
Aluminum frame
Joints of the rear derailleur
with poor function or
1x annually
What to use as lubricant
chainlube
silicon-free fat
assembly grease
spray oil
53
Werbung
