Monster Abra A7 Benutzerhandbuch Seite 10

Prepare the following before setting up your PCIe SSDs in RAID mode:
• The Microsoft Windows 11 OS on a DVD or USB flash drive.
• A connected external DVD drive.
• Two identical PCIe solid state drives.
• The Device Drivers & Utilities + User's Manual disc.
• A USB Flash drive or external USB hard disk drive.
Note: All SSDs in a RAID should be identical (the same size and brand) in order to
prevent unexpected system behavior.
RAID Setup Procedure
1. Go to the operable computer and copy the f6mdflpy-x64 folder from the
location below (D: denotes your DVD drive) on the Device Drivers & Utilities +
User's Manual disc to the USB Flash drive or external USB hard disk.
• D:\Options\Raid\F6\Driver
2. Start-up your notebook computer and press F2 to enter the BIOS and go to the
Setup Utility.
3. Select the Advanced menu.
4. Select VMD Mode and select Enabled.
5. Press F10 to Save and Exit and select <Yes>.
6. After the computer restarts press F2 to enter the BIOS again and
go to the Setup Utility.
7. Go to Intel(R) Rapid Storage Technology (in the Advanced menu) and select
Create RAID Volume.
8. You can now setup your RAID volume using the installed SSDs.
9. Select Name and type a name of your choice for your RAID
volume and select <Yes>.
EN
09