Polar Cadence Sensor Gebrauchsanleitung Seite 5

Your safety is important to us. Check that you can turn
your handlebar normally and cable wires for brakes or
gearing do not catch on the sensor. Check also that the
sensor does not disturb pedaling or the use of brakes
or gearing. While riding your bike, please keep your
eyes on the road to prevent possible accidents and
injury.
Before you start cycling, you should set the wheel size
of your bicycle into the cycling computer and turn
the cadence function on. For further information on
how to use the Polar Cadence Sensor with the cycling
computer, please refer to the user manual of the
cycling computer in question.
CARE AND MAINTENANCE
• Do not immerse the cadence sensor in water.
• Keep the cadence sensor clean. Clean it with a mild
soap and water solution and in the end rinse it
with clean water. Dry it carefully with a soft towel.
Never use alcohol or any abrasive material such as
steel wool or cleaning chemicals.
• Avoid hard hits as these may damage the sensor.
Cadence sensor battery
Contact your authorized Polar Service Center for a
replacement of cadence sensor.
FREQUENTLY ASKED QUESTIONS
What should I do if...
...the cadence reading is 00 or there is no cadence
reading while cycling?
• Check the correct position and distance of the
cadence sensor with the crank magnet and the
cycling computer.
• Check that you have set the correct cycling settings
in your cycling computer. For further information
please refer to the user manual of the cycling
computer in question.
• If the 00 reading appears irregularly, this may be due
to temporary electromagnetic interference in your
current surroundings.
• If the 00 reading is constant, you may have exceeded
3500 riding hours and the battery is empty.
3