Wiring Instructions For Inter-Unit Connections - Panasonic CS-ME7NKE Bedienungsanleitung

3-7. Wiring Instructions for Inter-unit Connections

(1) Grasp both ends of the air intake grille, and
remove it by opening towards the front and
pulling towards you.
(2) Remove the screw on the right side cover
plate and open the cover.
(Fig. 24a or 24b)
(3) Insert the inter-unit wiring into the through-
WKHZDOO 39& SLSH /HDG WKH SRZHU ZLULQJ
into the room allowing approx. 25 cm to
extend from the wall face. (Fig. 25)
(4) Route the inter-unit wiring from the back of
the indoor unit and pull it towards the front
for connection. (Fig. 26a or 26b)
(5) Connect the inter unit wiring to the corre-
sponding terminals on the terminal plate
(Fig. 26a or 26b) while referring to the
wiring diagram.
(6) Be sure to secure the wiring with the pro-
vided clamp.
NOTE
When closing the air intake grille, press the bot-
tom right and left corners and center. (Fig. 27)
Please refer to "How to replace the grille" on
page 9 or 10 for installing the air intake grille.
(CS-ME7NKE, CS-ME9NKE,
CS-ME12NKE)
Fig. 24a
Rear
panel
Wiring
(CS-ME7NKE, CS-ME9NKE,
CS-ME12NKE)
Fig. 26a
12
(CS-ME18NKE, CS-ME24NKE)
Cover
Fig. 24b
Plastic
cover
25 cm
Fig. 25
(CS-ME18NKE, CS-ME24NKE)
Fig. 26b
Fig. 27
Cover