Energy Saving Tips; Using The Cooler - Mobicool DC Bedienungsanleitung

Mobicool DC
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Remove individual drinks bottles through the bottle hatch, if present.
6.2

Using the cooler

➤ Place the cooler on a firm base.
➤ Connect the DC cable to the cigarette lighter or the DC socket in the
vehicle.
Coolers without the additional heating feature
✓ The cooler starts cooling the interior.
➤ To switch off the cooler, disconnect the plug.
Coolers with the additional heating feature
➤ Push the switch on the control panel to HOT or COLD to switch the cooler
on.
✓ The indicators on the control panel show you the operating mode:
Operating display
Red
Green
✓ The cooler starts cooling/heating the interior.
➤ To switch off the cooler,
– push the switch on the control panel from HOT or COLD to the OFF
position,
– disconnect the plug.
EN
Operating mode
Heating
Cooling
Operation
9