Operation; Technical Parameter - Beamz Light Package 3 Gebrauchsanleitung

OPERATION

• Lasers are not designed for continual use. Regular breaks during operation are essential to maximize the life of this device.
• Do not switch the unit off and on again in a short time, let the laser cool down before switching the laser on.
• Important: Never look directly into the laser beam!
Remove the unit from the mains when not in use.

TECHNICAL PARAMETER

Rating Voltage: .............................. 5VDC / 1500mA
AC Power supply ........ 100V~240VAC / 60Hz-50Hz
Laser source· ........................ 50mW green 532nM
.................................................... 80mW red 650nM
Dimensions .................................. 122 x 92 x 52mm
Weight ........................................................... 0.48kg
Pls note!
The use in France is only allowed to the professional user and not to the enduser. See decision:
www.legifrance.gouv.fr
—6—