Congratulations!
You have chosen to purchase a high-qual-
ity product. Familiarise yourself with the
product before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and
only for the given areas of application.
Store these assembly instructions careful-
ly. When passing the product on to third
parties, please also hand over all accom-
panying documents.
Package contents (Fig. A)
1 x garden tool shed, disassembled
1 x assembly materials
(F1-F3, F6, S1, S2)
1 x assembly instructions
Technical data
Dimensions: approx. 165 x 230 x 195cm
(L x W x H)
Base area: approx. 3.5m
2
Total weight: approx. 60kg
Date of manufacture (month/year):
06/2024
This symbol indicates that the
product is UV-resistant.
This symbol indicates that the
product is weather-resistant.
Intended use
This product provides storage space
outdoors, e.g. for garden tools and equip-
ment. The product is not intended for
commercial use.
Safety information
Life-threatening hazard!
• Never leave children unattended with
the packaging materials. There is a risk
of suffocation.
Risk of injury!
• Use protective gloves when assembling
to avoid cutting fingers.
• Never assemble or disassemble the
product in extreme weather conditions,
such as strong wind.
• Choose ground that is as solid and level
as possible for erecting the product.
• Ensure the product is properly stabi-
lised before using it. If necessary, install
a base in the product (not included in
the package contents).
• No modifications may be made to the
product!
• The product is not a toy or climbing
apparatus! Ensure that people, espe-
cially children, do not pull themselves
up on the product or lean against it. The
product may tip over.
• The product is not a toy. Never allow
children to be around the product unsu-
pervised.
22
GB/IE
• Check the product for damage or wear
before each use. Check regularly to
make sure all screws are tight! The
product may be used only if it is in per-
fect condition.
Assembly
CAUTION.
RISK OF INJURY!
Despite great care being taken, the
components may have sharp edges.
Wear protective gloves.
The product should be assembled by
three people.
Note: to facilitate assembly, do not tight-
en the screws too much initially.
To assemble the product, you will need
a suitable screwdriver and spanner (not
included in the package contents).
Note: it is recommended to set up the
product at the installation site.
1. Place the product on a flat, soft surface.
(Warning: setting up on a hard surface
can lead to scratching of the product
and the floor!)
2. Remove the protective film before
assembly.
3. Assemble the product as shown in
Figures B–A3.
4. Place the product on a level, non-slip
surface.
Note: if necessary, lay a subfloor (not
included in the package contents) to
ensure a level surface.
Setting up the product
When setting up the product, the follow-
ing must be taken into consideration:
• Avoid overhanging trees as breaking
branches pose a danger.
• Protect the product from excessive
loads of snow and wet leaves. Other-
wise the product may be damaged by
the weight.
Storage, cleaning
When not in use, always store the product
clean and dry at room temperature. Only
clean the product with a damp cloth and
wipe dry afterwards. If necessary, remove
stubborn stains with a mild cleaning agent
and water.
IMPORTANT! Never clean the product
with harsh cleaning agents.
Disposal
Dispose of the product and
packaging materials in accordance
with current local regulations. Store
the packaging materials (foil bags,
for example) out of the reach of children.
For further information about disposal of
the product no longer needed, contact
your local council. Dispose of the product
and the packaging in an environmentally
friendly manner.
The Recycling Code distinguishes
different materials to be returned
for recycling. The Code consists of
the recycling symbol for the recycling
process and a number that identifies the
material.
Notes on the guarantee and
service handling
The product was produced with great
care and under continuous quality control.
DELTA-SPORT HANDELSKONTOR GmbH
gives private end customers a three-year
guarantee on this product from the date
of purchase (guarantee period) in accord-
ance with the following provisions. The
guarantee is only valid for material and
manufacturing defects. The guarantee
does not cover parts that are subject to
normal wear and tear and that are thus
considered wear parts (e.g. batteries) and
it does not cover fragile parts such as
switches or parts that are made of glass.
Claims under this guarantee are excluded
if the product has been used incorrectly,
improperly, or contrary to the intended
purpose, or if the provisions in the instruc-
tions for use were not observed, unless
the end customer proves that a material
or manufacturing defect exists that was
not caused by one of the aforementioned
circumstances.
Claims under the guarantee can only be
made within the guarantee period by pre-
senting the original sales receipt. Please
therefore keep the original sales receipt.
The guarantee period is not extended by
any repairs carried out under the guaran-
tee, under statutory guarantees, or as a
gesture of goodwill. This also applies to
replaced and repaired parts.
If you wish to make a claim please first
contact the service hotline mentioned
below or contact us by e-mail. If there is a
guarantee case, then the product will be
repaired or replaced free of charge to you
or the purchase price will be refunded,
depending on our choice. There are no
further rights from the guarantee.
Your legal rights, in particular guarantee
claims against the respective seller, are
not limited by this guarantee.
Guarantee handling
To ensure rapid processing of your case
please follow the following instructions:
• For all inquiries keep the sales re-
ceipt and product number (e.g. IAN
123456_7890) handy as proof of pur-
chase.
• You will find the product number on the
product label, on an engraving on the
product, on the title page of your in-
structions (bottom left), or on the sticker
on the back or bottom of the product.