Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
OPENING THE
BATTERY COVER
Step 1
Slide the cover lock downward
and hold until step 2.
Step 2
Push the battery cover to the
right. (pushing the corner marked
in right picture)
Step 3
Lift the cover slowly.
TO CLOSE
Step 1
Close the cover slowly while
making sure the waterproof seal
fits into the opening.
Step 2
Press the entire cover against
the camcorder with equal force
8
and firmly attach the cover
completely.
Step 3
Slide the cover until it clicks into
place. (The cover is not properly
closed if the security lock is on
UNLOCK position.)
CAUTION
Do not apply excessive force
when opening or closing the
terminal cover.
Do not open or close the battery
cover with wet or dirt/sand-
covered hands
Do no allow any dirt, lint, hair,
sand or other foreign substances
to accumulate between the
waterproof seal and the case.
Never damage or scratch the
waterproof seal and terminal
cover. Doing so can result in leaks
Werbung
