When To Change The Dust Compartment Filter (For Motor Protection); How To Change The Dust Compartment Filter; When To Replace The Exhaust Filter; How To Replace The Exhaust Filter - Miele HS15 Gebrauchsanweisung

^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.
,
The lid will not close without a
dustbag in place. Do not force it!
When to change the dust
compartment filter (for motor
protection)
Replace this filter every time you start a
new packet of dustbags. A dust
compartment filter is supplied with
every packet of Miele dustbags.
How to change the dust
compartment filter (dia. 29)
^ Open the dust compartment lid.
^ Pull the dustbag out by the grip on
the collar.
^ Open the blue filter frame fully and
remove the old filter. Hold by the
clean, unsoiled section to remove it.
^ Replace with a new dust
compartment filter.
^ Close the filter frame.
^ Fit the new dustbag into the blue
holder as far as it will go.
^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.

When to replace the exhaust filter

Replace the Active AirClean 50 or
HEPA AirClean 50 exhaust filter if the
display for the exhaust filter change
indicator is completely filled with red
(dia. 13).
This occurs after approx. 50 hours of
operation which is equivalent to about a
year of average use. The vacuum
cleaner can still be used. However, the
suction power will be reduced as will
the effectiveness of the filter if it is not
replaced in good time.
Depending on model, your vacuum
cleaner will be fitted as standard with one
of the following exhaust filters (dia. 8):
b Active AirClean 50
c HEPA AirClean 50
You can of course replace the Active
AirClean 50 b or HEPA AirClean 50 c
fitted as standard with an AirClean a
filter (see "Maintenance - Replacing one
type of exhaust filter with another").

How to replace the exhaust filter

(dia. 30 + 31)
Do not use more than one exhaust
filter at a time.
^ Open the dust compartment lid.
^ Lift the Active AirClean 50 or HEPA
AirClean 50 exhaust filter and remove
it.
^ Insert the new Active AirClean 50 or
HEPA AirClean 50 exhaust filter
making sure it goes in properly, then
push it down into position.
en
41