Grundig CDP 6600 Bedienungsanleitung Seite 24

ADDITIONAL FUNCTIONS
Creating a track memory
This function enables you to save up to
64 tracks or files on the current disc in a
particular order and then play them
back. The same track may be stored
more than once.
1 Insert the disc and press »
start playback.
2
Press »MODE« to call up the func-
tion.
– Display: »
PGM
3
Select the desired album with »DIR«
(only MP3).
4 Select the desired file or track by
pressing »
5
Save the file or track by pressing
»MODE«.
Notes:
To store more files or tracks,
7
repeat steps
If you try to store more than 64
7
files or tracks, the first track you
saved is displayed.
Playing back a track mem-
ory
1
Start the track memory by pressing
e II«.
»
– Display: playback begins with the
first programmed file or track.
24 ENGLISH
« after
7
« flashes.
« or » «.
3 4 to 5.
or
_________________
2
End playback of the track memory
with » «.
7
3
To play the track memory again,
press »MODE« and afterwards
e
» II«.
Deleting the track memory
1
In Stop mode, press »
the CD compartment.
Note:
The track or file memory is also
7
deleted if the mains adapter is dis-
connected or if the batteries are
removed from the device.
Digital anti-shock system
(DAS)
The anti-shock system reads the data
on the CD-DA 40 seconds in advance
(or 120 seconds in MP3 mode). DAS
ON = memory used for reducing bat-
tery consumption (CD stops after a
while). DAS OFF = optimum anti-shock
performance, memory is constantly
loaded. You cannot switch off the anti-
shock system in MP3 mode.
1
Press »ASP« to switch the anti-shock
system on or off.
« or open
7