Herunterladen
Teilen
Diese Seite drucken
EDIFIER H9 Bedienungsanleitung
  1. Anleitungen
  2. Marken
  3. EDIFIER Anleitungen
  4. Kopfhörer
  5. H9
  6. Bedienungsanleitung
EDIFIER H9 Bedienungsanleitung

EDIFIER H9 Bedienungsanleitung

Vorschau ausblenden
1
2
3
4
5
6
7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Quicklinks

Diese Anleitung herunterladen
Wireless Over-Ear Headphones with Active Noise Cancellation
EN 1. Power ON/OFF
Press and hold the power button to power on/off.
2. First pairing
1. Once powered on, the headphones will automatically enter
Bluetooth pairing mode.
2. Select "EDIFIER H9" from your device list to connect.
3. Pairing for new device
1. In ON state, press and hold the "
enter Bluetooth pairing mode.
2. Select "EDIFIER H9" from your device list to connect.
Note: For subsequent use, the headphones will automatically connect to the device used last time.
4. Multipoint connection
①
②
③
Bluetooth
EDIFIER H9
1. Pair device A with the headphones successfully.
2. Press and hold the "
pairing mode, and then select "EDIFIER H9" in device B settings
to connect.
3. Select "EDIFIER H9" again in device A settings to connect, and the
multipoint connection is done.
Note: For subsequent use, the headphones will automatically reconnect to the two devices
used last time.
5. Charging
Connect the headphones to a power source via the USB-C cable for
charging.
Note: 1. Make sure the USB-C port is completely dry before charging.
2. When charging with a USB-C cable, the product is used as wired headphones
and Bluetooth functions are unavailable.
6. Controls
●
Call
●
Music
●
Mode
Note:
1. "x 1" Press, "x 2" Double press, "—" Press and hold;
2. Default sound control: High Noise Cancellation / Ambient Sound / Noise Cancellation Off.
3. Download EDIFIER ConneX App for more customizable control settings.
7. Reset
1. In ON state, press the "+" and "-" buttons simultaneously for about 5
seconds to finish reset.
2. The headphones will automatically enter Bluetooth pairing mode if
successful.
8. Wired listening
Connect to the headphones via the USB-C cable. Wired listening will
automatically disable Bluetooth mode.
H9
Model: EDF200174
Manual
3s
A
" button for 3 seconds to re-enter Bluetooth
x1
x1
x2
x1
x2
x1
x1
x2
x1
USB-C
ON
-
OFF
-
Bluetooth
EDIFIER H9
Bluetooth
3s
EDIFIER H9
" button for about 3 seconds to
x6
Bluetooth
EDIFIER H9
A
B
Input: 5V
1A
5s

Werbung

loading

Verwandte Anleitungen für EDIFIER H9

Inhaltszusammenfassung für EDIFIER H9

  • Seite 1 "EDIFIER H9" in device B settings to connect. 3. Select "EDIFIER H9" again in device A settings to connect, and the multipoint connection is done. Note: For subsequent use, the headphones will automatically reconnect to the two devices used last time.
  • Seite 2 2. Première association Bluetooth EDIFIER H9 1. Une fois allumés, le casque entre automatiquement en mode de couplage Bluetooth. 2. Sélectionnez « EDIFIER H9 » dans la liste de votre appareil pour vous connecter. 3. Association pour un nouvel appareil Bluetooth EDIFIER H9 1.
  • Seite 3 Bluetooth, y luego seleccione "EDIFIER H9" en los ajustes del dispositivo B para conectarlo. 3. Seleccione de nuevo "EDIFIER H9" en los ajustes del dispositivo A para conectar, y la conexión multipunto se habrá realizado. Nota: Para usos posteriores, los cascos volverán a conectarse automáticamente a los dos dispositivos usados la última vez.
  • Seite 4 Bluetooth-Kopplungsmodus zu gelangen, und wählen Sie dann „EDIFIER H9“ in der Geräteeinstellung B, um eine Verbindung herzustellen. 3. Wählen Sie erneut „EDIFIER H9“ in den Einstellungen für Gerät A, um eine Verbindung herzustellen, und die Multipoint-Verbindung ist hergestellt. Hinweis: Bei der nächsten Verwendung werden Kopfhörer automatisch wieder mit den beiden...
  • Seite 5 1. "x 1" Premere, "x 2" Premere 2 volte, "—" Premere e tenere premuto; 2. Controllo del suono predefinito: Cancellazione del rumore elevato / Suono ambientale / Cancellazione del rumore disattivata. 3. Scarica l'App EDIFIER ConneX per impostazioni dei comandi più personalizzabili. 7. Ripristino 1. Nello stato di accensione, premere contemporaneamente i pulsanti "+"...
  • Seite 6 1. "x 1" Pressione, "x 2" Pressione duas vezes, "—" Mantenha pressionado; 2. Controle de som padrão: Alto cancelamento de ruído / Som ambiente / Cancelamento de ruído desligado. 3. Faça o download do App EDIFIER ConneX para obter mais configurações de controle personalizáveis. 7. Reiniciar 1.
  • Seite 7 注意：後の使用のために、 ヘッドホンは前回使用したデバイスに自動的に接続します。 4. マルチポイント接続 Bluetooth EDIFIER H9 ② ③ Bluetooth EDIFIER H9 1. デバイスAとヘッドホンを正しくペアリングします。 2. 「 」ボタンを3秒間押し続けてBluetoothペアリングモードを入り、 「EDIFIER H9」をデバイスBの設定で選び、接続します。 3. デバイスAの設定で再び「EDIFIER H9」 を選択すると、 マルチポイ ン ト接続が完了します 。 注意：次回以降に使用する場合、自動的にヘッドホンは、最後に使用した2つのデバイスに再接続し ます。 5. 充電 入力: 5V 充電するには、USB-Cケーブルを介してヘッドホンを電源に接続します。 注意： 1. 充電を行う前に、USB-Cポートが完全に乾燥した状態であることを確認してください。 2. USB-Cケーブルを用いた充電中、本製品は有線ヘッドホンとして使用され、Bluetooth機能は 利用できません。...

Diese Anleitung auch für:

Edf200174