Never use the product
barefooted or wearing open
sandals.
Wear respiratory protection to
protect yourself against dust.
Do not wear loose hanging
clothing, clothing with
hanging laces, ties, or
jewellery that could be sucked
into the air intake.
Wear protective headgear to
contain long hair.
Keep long hair away from the
suction apertures.
Pay attention to people,
especially children, pets, open
windows, etc. The blown
material can be thrown in their
direction. Stop working if they
are in close proximity. Keep a
safety distance of 5 m around
you.
Be familiar with your
surroundings and pay
attention to potential dangers
that may be overlooked when
working.
Carefully inspect the surface
to be cleaned and remove all
wires, stones, cans and other
foreign bodies.
Before starting to work with
the product, use a rake or
broom to remove foreign
bodies.
Use both parts of the blower
pipe so that you can direct the
airflow close to the ground.
In very dry conditions, lightly
moisten the surface to be
cleaned or use a sprayer to
reduce the build-up of dust.
Do not work with a damaged
or incomplete product or one
which has been converted
without the permission of the
manufacturer.
Before use, check the safety
status of the product, in
particular the on/off switch.
Only use the product when
fully assembled.
Only use the product in
vacuum mode if the collection
bag is attached.
Check the collection bag
regularly for wear or damage.
Never operate the product
with defective protection
equipment or faulty protection
covers or without any
protection equipment.
The operator or user is
responsible for accidents and
injuries to other people or
damage to their property.
Operate the product in the
recommended position and
only when standing on a
solid, flat surface.
GB/IE
39