Possible Cause - Philips QP2531 Bedienungsanleitung

Problem
The appliance
does not charge
when it is
connected to the
mains.
I cannot switch
on the appliance
when it is
connected to the
mains.
The appliance
does not work
anymore.

Possible cause

The appliance has
to be switched off
when you charge it.
You cannot use the
appliance when it
is charging. You can
only use the
appliance without
cord.
The rechargeable
battery is empty.
The blade is
blocked by dirt.
English
Solution
Switch off the appliance.
Disconnect the appliance
from the mains before use.
Charge the appliance (see
chapter 'Charging').
QP2530: During charging,
the battery charge
indicator flashes. QP2520:
During charging, the
charge indicator on the
adapter lights up. If the
battery charge indicator
does not flash or light up,
check whether there is a
power failure or if the wall
socket is live. If there is no
power failure and the wall
socket is live but the
battery charge indicator
still does not flash or light
up, take the appliance to
your dealer or a Philips
service center.
Switch on the appliance
and rinse the blade under
the tap with warm water.
Hold the blade in a cup
with warm water (60°C and
no hotter) for approx.30
seconds.
21