T+A Cala Betriebsanleitung Seite 76

Setting the
Parameters for
a Radio
Network
Searching for
and Selecting
the Network
The Configuration for a WLAN connection
• Connect the WLAN aerial (supplied) to the 
and ensure that no cable is attached to the 
• Switch the   on, and select the Streaming Client function by
 
pressing the  button.
• Now call up the Configuration menu as described above: with a long
press on the  button. You should now see the menu reproduced
below, dis-playing the network parameters.
First select the menu point 'WLAN configuration start', and activate it
by pressing the  button.
A menu appears showing these points:
Rescan
•
networks
Set manually
•
After a brief delay the networks present in the vicinity are listed on the
screen.
You can use the 'Rescan' function to start a new search for networks
present in the vicinity.
Please select one of the networks located, and activate it by pressing the
 button.

 
- initiates new search for accessible radio
- adding a WLAN manually
76
 WLAN aerial socket,
 
 LAN socket.
 
Settings