Audizio RP119 Serie Bedienungsanleitung Seite 6

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging. If the device has been
exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off until it has reached room temperature.
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the
mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The
unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
1. Platter
Place your record here.
2. 45rpm adapter
This adapter allows you to play 45RPM records.
3. Tone arm
The fixed tonearm can be raised and lowered by hand, or
by pressing the raise /lower lever.
4. Arm clip
This arm clip secures the tonearm while at rest or when
not in use. The arm clip has been designed to remain in
the up position whilst unlocked.
5. Stylus cartridge
Cartridge containing the stylus/needle.
6. Tone arm lever
Use to raise/lower the tone arm.
7. Autostop ON/OFF
This switch turns the auto stop-function on/off. When
the automatic stop is enabled, the platform will start
rotating as soon as the tone arm is placed over the record
and will stop rotating when it has reached the end of the
record. Some vinyl records stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
8. 33 / 45 / 78 RPM
Use to adjust the RPM of the turntable platter.
9. BT/phono/BT out
Rotate to choose between phono-, bt- or bt out modes.
BT enables playing music from a streaming device.
BT out enables directing the sound from phono record playback to wireless BT headphones- or speakers.
10. Pitch control
The turntable speed can be increased or decreased by approximately 10% by rotating the Pitch Control knob. To increase
the speed, rotate the Pitch Control knob clockwise. To decrease the speed, rotate counter-clockwise.
11. Power & Volume control
To power on the record player, rotate clockwise until it clicks. When powered on, use this knob to adjust the volume for
the internal speakers and headphones. To turn off the record player, rotate this knob counter clockwise until it clicks.
12. Headphone output
Connect your headphone with this 3,5 mm (1/8) jack connector.
13. Line output
RCA connector line output to connect external speakers (not included).
14. AUX input
3.5 mm auxiliary input jack. The aux in connection will automatically override the turntable and BT functions. To resume
using the turntable or BT functions, unplug the auxiliary cable from the aux in jack.
15. DC 5V IN
5V power socket for connecting the supplied power adapter.
• Remove the record player from the package box.
• Plug in the power adapter and turn on the device.
Caution: Use only the adapter supplied with the unit. Connecting a power supply with a different rating can cause permanent
damage to the unit and may be hazardous.
6