Levelling; Start-Up; Before Starting Up For The First Time; Connecting The Appliance To The Mains Supply - Gastro-Cool Bag-In-Box Bedienungsanleitung

7.2 Levelling

If the bearing surface is uneven the appliance can be balanced with the
front feet. Turn the foot (34) until the appliance stands firmly on the
ground horizontally and without wobbling.
8

Start-up

8.1 Before starting up for the first time
After transportation the appliance should be left to stand for at least
24 hours so that the refrigerant can collect in the compressor. Non-
observance of this may damage the compressor and so lead to the
appliance malfunctioning. In such a case the guarantee becomes invalid.
Clean the interior of the refrigerator and all of the accessories to be
found here with commercially available, mild cleaning products.

8.2 connecting the appliance to the mains supply

IMPoRTAnT
It is imperative that the appliance be earthed according to
the directions. For this purpose the plug of the connecting
cable is provided with the appropriate contact.
32
34
IMPoRTAnT
Call a specialist electrician if the plug does not fit into the
socket. Do not try to force the plug into the socket.
IMPoRTAnT
If you disconnect the appliance from the mains supply, or
if a power cut occurs: wait for 5 minutes before you restart
the appliance.
9

operation

9.1 Switching the appliance on

In order to switch on the appliance push the mains plug into the socket.

9.2 Setting the temperature

The temperature can be adjusted from 0°C to 10°C. Adjustment is
by pushing the UP (warmer) and DOWN (cooler) buttons. When
the compressor operates, the COOLING lamp illuminates, when the
compressor stops, the COLD lamp illuminates.
°C
Cold
Cooling
Within the cooler, there are three levels with different temperatures.
Thus it is possible, e.g. to store both red and white wine in the
cooler simultaneously.

Up

Down
33