Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Darüber hinaus ist das dauerhafte Einschalten wählbar, wobei das Ausschalten dann nur über ein anderes Signal bzw. eine andere
Sendertaste möglich ist.
Wenn anstelle oder parallel zur Funkauslösung das Relais drahtgebunden eingeschalten werden soll, kann der Anschluss +U (positive
Versorgungsspannung) über einen Taster (kein Lieferumfang) auf den Anschluss "Ext.-ON" getastet werden.
Bei AC-Versorgung genügt ein Pol der Versorgungsspannung.
7
Die Antenne
Der Empfänger SHR-7 K1 ist mit einer integrierten Antenne für eine optimale Empfangscharakteristik bestückt.
Achten Sie darauf, dass jede Berührung mit Spannungsführenden Teilen vermieden wird. Besonders im Bereich der
Anschlussklemmen !
8
Technische Daten
Relay
Arbeitsfrequenz
Ausgang
Schaltleistung
Antenne
Spannungsversorgung
Stromverbrauch bei 12V
Arbeitstemperatur
Gehäuseabmessung
1-Channel radio receiver
Please read carefully!
These operating instructions form an integral part of this product and contain important information on how to commission, install and
operate it. They must be taken into consideration and given to the end user or other third party when the installer hands over the
product. These operating instructions must be retained for future reference.
Damage resulting from abuse or misuse is not covered by warranty. The manufacturer accepts no warranty for consequential losses
that may result directly or indirectly from use of this equipment. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user´s authority to operate the equipment.
The product meets the requirements of the current European and national guidelines for electromagnetic compatibility. Conformity has
been established and the relevant statements and documents have been deposited at the manufacturer.
1
Mode of operation
The Receiver SHR-7 K1 verifies coded radio frequency signals sent by corresponding transmitters and operates relay outputs on
receipt of a correct signal.
It must be noted that for applications or installations involving wireless transmission and which could have an influence to safety of man
or machine, there may be a risk of unforeseen operation from extraneous uncontrolled radio signals.
It should be noted that for applications that could put human life at risk, by using radio connection there is always
present a potential hazard due to extraneous disturbances.
The Operating Instructions need to be followed at all times.
2
Safety Precautions
Ensure that the product is isolated from any power supply before opening. Opening and installation of the product
must be performed only by a qualified electrician.
Further safety precautions
Every applicable regulations and standards have to be observed, in particular VDE0100, VDE0550/0551, VDE0700, VDE0711 and
VDE0860. The use of solid cables for connection is recommended since terminal design does not incorporate stress relief. The
product corresponds to Safety-Class II (without protective earth terminal) according to VDE0700, IEC335EN60335.
For commercial use, compliance must be made with the recommendations and instructions of the responsible regional/national
authorities.
For use in public institutions, schools, clubs and do-it-yourself workshops the operation of this product has to be supervised by
qualified personnel.
We do not assume any warranty and liability for personal or material damages caused by incorrect application or by failure to follow
these operating instructions.
For reasons of safety and conformity (CE) it is not permitted to modify or change parts of the product.
Electrical devices should be out of reach of children. Please be extra careful if children are around.
Opening and installation of this product has to be performed by authorised electricians only.
If you have not the corresponding expertise, ask qualified specialists or workshop for installation and commissioning. This product
and connected devices can be damaged as a result from inappropriate installation, connection or operation. Furthermore, this could
lead to other damages e.g. short circuit, fire or electric shock.
The product must not be installed or used in places where a risk of explosion may exist.
Do not touch antenna connectors with live parts.
230V AC / 6A oder 30V DC / 5A
433,92 MHz
1 potentialfreier Wechselkontakt
230V AC / 6A oder 30V DC / 5A
innenliegende Bügelantenne
12 bis 24 VDC / 12V AC
ca. 9 mA; 30mA mit aktivem Relais
o
o
-20
C bis +65
C
64 mm x 53 mm x 28 mm
Operating Instructions
- 3 -
(D –
GB
–
F)
Werbung
