Sharp PN-LA752 Installationsanleitung Seite 9

nRear view
PN-LA652
Power cord
1
(Supplied)
For power outlet
1
For power
outlet
*1 This port is for "CLONE SETTING" and future software upgrades.
Imports or exports the monitor settings via the USB flash device when selecting "CLONE SETTING". (See OPERATION
MANUAL.)
*2 Factory setting. When using USB-C,there is no need to connect the USB cable to the TOUCH PANEL terminal. You can
set the terminal that connects the computer and touch panel in each input mode with "TOUCH INPUT SELECT". (See
OPERATION MANUAL.)
TIPS
• Be sure to clamp the power cord (supplied) by using the supplied cable clamp. When clamping the power cord, take care not
to stress the terminal of the power cord. Do not bend the power cord excessively.
• To use the touch panel with an HDMI / DisplayPort connection, connect the supplied USB cable to the computer.
The touch panel and touch pen operate with the standard driver of each operating system. On the Mac, operation is only
possible in mouse mode.
• The Information Display Downloader can also be downloaded from the following website.
https://business.sharpusa.com/product-downloads (US)
https://www.sharp.eu/download-centre (Europe/Asia/Pacific)
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs and latest firmware.
To install the software, see the manual for each.
Pen Software setup program and Touch Viewing Software/Touch Viewer setup program, latest firmware can be downloaded
using Information Display Downloader.
* 2 3 4 5
1
Power cord
(Supplied)
PN-LA652
Power cord (Supplied)
1. AC input terminal
2. RS-232C input terminal
10
3. Audio output terminal
4. LAN terminal
5. DisplayPort output terminal
6. HDMI2 input terminal
(support ARC)
11
7. DisplayPort input terminal
8. USB port (USB3.0 compliant,
12
Type-A)
13
9. TOUCH PANEL terminal
(for HDMI1/HDMI2/DisplayPort*
10. Option board slot
11. USB Type C port*
12. HDMI1 input terminal
6 7 8 9
13. USB port (USB3.0 compliant,
Type-A)
Cable clamp (Supplied)
2
)
2
7 7
E E