Herunterladen Diese Seite drucken

Werbung

04.24 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Wandleuchte mit PIR-Bewegungs- und Lichtsensor
Wall luminaire with PIR motion and light sensor
Applique avec détecteur de mouvement et capteur luminosité PIR
40
40
Ø 4,5
Gebrauchsanweisung
Anwendung
Freistrahlende Wandleuchte mit eingebautem
Passivinfrarot-Bewegungs- und Lichtsensor
zum Betrieb in einem vorhandenen DALI-
System.
Eine Leuchte aus Aluminiumdruckguss und mit
schlagfester Kunststoffabdeckung.
Leuchtmittel
Modul-Anschlussleistung
Leuchten-Anschlussleistung
Bemessungstemperatur
Umgebungstemperatur
24 186 K3
Modul-Bezeichnung
Farbtemperatur
Farbwiedergabeindex
Modul-Lichtstrom
Leuchten-Lichtstrom 
Leuchten-Lichtausbeute 
24 186 K4
Modul-Bezeichnung
Farbtemperatur
Farbwiedergabeindex
Modul-Lichtstrom
Leuchten-Lichtstrom 
Leuchten-Lichtausbeute 
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Die Montage und Inbetriebnahme darf nur
durch eine Elektrofachkraft erfolgen.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
30
30
unten
bottom
dessous
325
325
Instructions for use
Application
Unshielded wall luminaire with integral passive
infrared motion and light sensor for use in an
existing DALI system.
A luminaire made of die-cast aluminium and an
impact-resistant synthetic cover.
Lamp
23,9 W
Module connected wattage
27,2 W
Luminaire connected wattage
t
= 25 °C
Rated temperature
a
t
= 35 °C
Ambient temperature
a max
24 186 K3
LED-0993/830
Module designation
3000 K
Colour temperature
CRI > 80
Colour rendering index
3975 lm
Module luminous flux
2465 lm
Luminaire luminous flux 
90,6 lm / W
Luminaire luminous efficiency 
24 186 K4
LED-0993/840
Module designation
4000 K
Colour temperature
CRI > 80
Colour rendering index
4180 lm
Module luminous flux
2592 lm
Luminaire luminous flux 
95,3 lm / W
Luminaire luminous efficiency 
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
Ø 350
Ø 350
Fiche d'utilisation
Utilisation
Applique à diffusion libre avec détecteur avec
détecteur de mouvement à infrarouge passif et
capteur de luminosité intégrés pour utilisation
dans un système DALI existant.
Un luminaire en fonderie d'aluminium injectée
avec cache en matière plastique antichocs.
Lampe
23.9 W
Puissance raccordée du module
27.2 W
Puissance raccordée du luminaire
t
= 25 °C
Température de référence
a
t
= 35 °C
Température d'ambiance
a max
24 186 K3
LED-0993/830
Désignation du module
3000 K
Température de couleur
CRI > 80
Indice de rendu des couleurs
3975 lm
Flux lumineux du module
2465 lm
Flux lumineux du luminaire 
90,6 lm / W
Rendement lum. du luminaire 
24 186 K4
LED-0993/840
Désignation du module
4000 K
Température de couleur
CRI > 80
Indice de rendu des couleurs
4180 lm
Flux lumineux du module
2592 lm
Flux lumineux du luminaire 
95,3 lm / W
Rendement lum. du luminaire 
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
L'installation et la mise en service ne doivent
être effectuées que par un électricien agréé.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant.
24 186
é
c
IP 65
110
110
23,9 W
27,2 W
t
= 25 °C
a
t
= 35 °C
a max
LED-0993/830
3000 K
CRI > 80
3975 lm
2465 lm
90,6 lm / W
LED-0993/840
4000 K
CRI > 80
4180 lm
2592 lm
95,3 lm / W
1 / 6

Werbung

loading

Inhaltszusammenfassung für BEGA 24 186

  • Seite 1 Leuchte vorgenommen, so gilt derjenige als manufacturer. considéré comme étant le fabricant. Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 6...
  • Seite 2 Erfassungsbereich verändern und portée ainsi que la zone de détection et zu Fehldetektionen führen. conduire à des déclenchements intempestifs. 2 / 6 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Seite 3 Befestigungsschrauben gleichmäßig anziehen. Serrer uniformément les vis de fixation. Lichtsensor mit Status-LED Light sensor with status LED Capteur de luminosité avec LED d’état BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 6...
  • Seite 4 Veiller au bon emplacement du joint. Auf richtigen Sitz der Dichtung achten. Installer la partie supérieure du luminaire et fixer. Leuchtenoberteil aufsetzen und befestigen. 4 / 6 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Seite 5 DALI dans le logiciel DALI über den DALI-Reset in der Software DALI- Cockpit ou dans l’application BEGA Tool. Cockpit oder in der App BEGA Tool. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 5 / 6...
  • Seite 6 83 001 927 Dichtung Wandplatte 83 002 166 B1 Gasket wall plate 83 002 166 B1 Joint contre-plaque 83 002 166 B1 6 / 6 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...