Cleaning and maintenance
58/78
–
Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the tan-
ning room or towards the user).
4.9
Clean the sensor
NOTE:
Do not spray the sensor directly with detergent.
Always remove the sensor from the station for cleaning.
–
Remove the sensor from the base station.
–
Clean the sensor housing, measuring window and base station with a
soft, damp cloth. See separate instructions (order no. Cleaning the sen-
sor).
–
Replace the sensor into the base station.
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
–
For the fast, hygienic and proper cleaning of the sensor
and base station, use specially developed cleaning
agents.
–
Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
not be used.