Assembly Of Bar And Chain - Texas EK 2040 Bedienungsanleitung

4. Assembly of bar and chain

1. Remove the plastic shield.
2. Place the chain around the nose wheel of the bar.
Place the bar onto the engine unit and fit
the chain around the bar.
3. Make sure that the chain is turned the right way
(forward).
see drawing
4. Mount the plastic shield.
5. Tighten the shield nut with your fingers.
6. Lift the tip of the bar and tighten the chain using the yellow ring around the shield nut.
The chain shall be tightened so that you can just lift the driving link free of the trace of
the bar.
7. Fastened the bar and shield cover securely.
Nose wheel
Chain wheel and bar
before mounting the chain
Chain wheel and bar after
mounting the chain
www.texas.dk
19