Endress+Hauser NAR300 Betriebsanleitung Seite 18

Warenannahme und Produktidentifizierung
18
A
B
 4 Typenschild des NRR261
A Typenschild des NRR261 für FM (integrierter NAR300)
B Typenschild des NRR261 für ATEX/IECEx (integrierter NAR300)
1 Bestellcode (Order code)
2 Seriennummer
3 Versorgungsspannung
4 Herstellungsdatum
Order Code
Seri. no.
XP-AIS Class I, Div. 1,2, Gp. C, D, T4
Class I, Zone 1[0], AEx db ia[ia] IIB T4
Ambient temperature: -20°C ~ + 60°C
Non Intrinsically safe circuit:
3
Power supply :
Um : AC 250 V 50/60 Hz, DC 250 V
Contact output : 5 A 250 V AC, 5 A 30 V DC
Manufacturing date:
Conduit entry of the main body: M26 x 1.5
Caution: A seal shall be installed within 18 inches of the enclosure.
: Do not modify internal parts or circuits.
: Use supply wires suitable 70°C minimum.
: Do not open the cover when energized.
: Refer to control drawing XA1745G-*/08/EN.
Endress+Hauser Yamanashi Co., Ltd
Yamanashi 406-0846 Made in Japan
Order Code
Seri. no.
ATEX: II 1/2G Ex db ia[ia Ga] IIB T4 Gb
FM 14ATEX0048X
IECEx: Ex db ia [ia Ga] IIB T4 Gb
IECEx FMG 14.0024X
Ambient temperature: -20°C ~ + 60°C NEMA 4X, IP67
Non Intrinsically safe circuit:
3
Power supply :
Um : AC 250 V 50/60 Hz, DC 250 V
Contact output : 5 A 250 V AC, 5 A 30 V DC
4
Manufacturing date:
Conduit entry of the main body: M26 x 1.5
Caution: Do not modify internal parts or circuits.
: Use supply wires suitable 70°C minimum.
: Do not open the cover when energized.
: Refer to Ex instruction manual XA01742G-*/08/EN
Endress+Hauser Yamanashi Co., Ltd
Yamanashi 406-0846 Made in Japan
NAR300-System
NRR261
1
2
4
NP-2745-1
NRR261
1
2
NP-2744-1
Endress+Hauser
A0039862