Quick Search Receive/Hold Modes; Search Options - Albrecht AE125H Bedienungsanleitung

To start a Quick Search at the current frequency during Close Call
Search, turn SCROLL CONTROL in Hold mode and press Hold to start
searching.
When the scanner finds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to the
delay setting.
While searching in Quick Search mode, the upper line displays Quick
Search and the lower line displays the searching frequency and the
direction indicator (↑or ↓) with the modulation.
If you want to change the search direction or if it is a long transmission
and you want to continue searching, turn SCROLL CONTROL or press
Srch/Svc.

Quick Search Receive/Hold Modes

To hold on a frequency press Hold. To step through the frequencies,
turn SCROLL CONTROL in Hold mode. Press Hold to resume.
While monitoring a transmission, the upper line displays Quick Search
and the lower line displays the current frequency and the direction
indicator (↑or ↓).
The modulation, Priority mode icon (if Priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC Pri or
CC-DND is enabled) will also appear in the display.
• To store a frequency, press Pgm/E. See Storing Found Search
Frequencies, page 102.
• To temporarily lock out a frequency, press L/O.
• To permanently lock out a frequency, press L/O twice quickly.
• To exit Quick Search, press Scan.
See also Search Options on page 100 for Delay, CTCSS/DCS settings,
and locking out/reviewing/unlocking frequencies.

Search Options

Search Delay
This setting controls how many seconds the scanner waits after a
transmission ends before resuming searching. If you select a minus
delay time, the scanner stops on the transmission for the setting time
100 English