Appendix; Querying The Firmware Version/Serial Number; Performing A Firmware Update Via The Update Server - Auerswald COMfortel 1200 Anleitung

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Querying the Firmware Version/Serial Number

1.
Press the menu key.
2.
Select the information menu:
3.
Confirm your selection:
4.
Scroll to the desired information:

Performing a Firmware Update via the Update Server

Important: Only available for operation on the PBXs COMpact 3000 ana-
logue/ISDN/VoIP, COMpact 5010 VoIP, COMpact 5020 VoIP and COM-
mander 6000/R/RX. On the other PBXs a manual firmware update can be
performed instead.
Requirements
– PBX connected to broadband Internet access
– Address of the update server configured in the PBX
– DNS server and, if necessary, HTTP proxy server configured in the PBX
1.
Press the menu key.
2.
Open the following menu:
COMfortel 1200/1400 - Firmware Version 1.4 - COMfortel Set 3.6.0 - Setup V01 04/2014

Appendix

COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: Press the OK key.
COMfortel 1400: Tap on OK or press the OK key.
The information selected last will be displayed.
COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: settings > synchronisation > firmware update
COMfortel 1400: settings > synchronisation > firmware update > FW
update server
The message firmware update execute? appears.
or
or or press the arrow keys
or
or or press the arrow keys
Appendix
.
or
.
or
.
.
53