Philips L'OR Barista LM8014 Bedienungsanleitung Seite 22

Problem
The light in the on/off button
flashes but the appliance does
not operate.
The appliance does not froth.
Milk escapes from under the lid.
The milk is not very hot.
Troubleshooting milk frother
Possible cause
You just prepared hot frothed milk
or hot milk and pressed the button
for milk or hot frothed milk again
without letting the appliance cool
down.
The temperature of the milk is too
high.
You have not placed the lid
properly on the appliance.
You did not attach the frothing coil
to the coil holder.
You used a type of milk that is not
suitable for frothing.
The inside of the milk jug is polluted
with milk residues, which prevents
the coil holder from rotating.
You put too much milk in the milk
jug.
This is normal.
English
Solution
If you want to prepare hot
frothed milk or hot milk
again, the milk jug needs to
cool down for a few minutes
before you can use it again.
As long as the milk jug is still
hot, the temperature limiter
makes sure that the
appliance cannot be
operated. You can rinse the
inside of the milk jug with
cold water to let it cool
down faster.
Replace the warm milk with
cold milk or let the
appliance cool down.
Place the lid properly.
Attach the frothing coil to
the coil holder.
Many factors can influence
the quality of the milk froth
(like protein content). If the
milk does not froth as you
would like, try a different
type or brand of milk. Use
semi-skimmed cow's milk at
refrigerator temperature for
the best frothing result.
Clean the coil holder and
the inside of the milk jug.
Do not fill the milk jug
beyond the MAX indication.
The milk is heated up to
approx 74°C to ensure the
best froth and taste. Milk
proteins start to break down
and burn if the milk is
overheated.
25