Preparing The Appliance; Environmental Protection; Operation - Kärcher SC 1125 Kurzanleitung

Preparing the Appliance

Unpacking the Appliance
When you unpack the system, check that
everything is complete (see page 3).
If there are any missing parts or you detect
any transport damage when unpacking,
please inform your dealer immediately.

Environmental protection

The packaging material can be recy-
cled. Please do not place the pack-
aging into the ordinary refuse for
disposal, but arrange for the proper
recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of
old appliances. Please dispose of
your old appliances using appropri-
ate collection systems.

Operation

Attaching the Accessories
Tightly insert the steam plug (C6) into the
appliance connector (A1). The locks of
the steam plug must lock into the cover
of the appliance connector (see Fig. 1).
Connect the required accessories (D1,
E1) with the steam gun (C1). Insert the
open end of the accessory on the steam
gun and push onto the steam gun until
the unlocking button (C2) of the steam
gun locks into place (see Fig. 2).
18 English
Use the extension pieces (G1) if neces-
sary. To do so, connect one or both ex-
tension pieces to the steam gun (C1)
(see Fig. 3).
Insert the required accessories (D1,E1,
H1) on the free end of the extension
piece.
The detail nozzle (D1) can also be used
with the round brush (D2). To do so, put
the two grooves of the attachments on
the locks of the detail nozzle and turn
clockwise until the stop.
Removing the Accessories
DANGER
Hot water may drip out of the accessory
parts while you are detaching them! Never
detach accessory parts while steam streams
out - risk of scalding!
Push the lock (C3) to the front (steam
switch blocked).
To detach the accessory parts, press the
unlocking button (C2 or G2), and pull the
items apart (see Fig. 4).
Figure 1
Figure 2
Figure 3
Figure 4