ULTIMEA Poseidon E40 Bedienungsanleitung Seite 10

EN
Notice: The projection image size refers to the
distance of the diagonal of the image size instead
of the length of the image size.
Auto Focus
Turn the device towards a suitable projection
●
surface or wall, the Poseidon E40 will enter autofocus
until get a clear image.
Focus Manual
Press "F+" / "F-" on the remote control to
●
manually adjust the focus. Please carefully observe
the focus icon until get a clear image.
Keystone Correction
The Poseidon E40 supports Auto keystone, Vertical
●
correction, Horizontal correction and remote
Corner Correction.
Auto Keystone
When the projector image is distorted, it will perform
●
auto keystone correction to restore the image to a
rectangle. If you find the auto keystone correction
does not work as well as before, follow the instructions
below to optimize it.
09
Press the button to go to projector home menu,
●
[Settings]->[Projection Settings]->[Keystone Settings].
Select [Calibration Settings] and adjust the projector
●
for the correct image.
Vertical / Horizontal correction
When fixing your projector in a place and use Vertical /
Horizontal correction. Press the
projector home menu, select [Settings]
->
Settings] [Keystone Settings]. Please turn off Auto
keystone correction and go back to the previous menu.
Select [Vertical Correction] / [Horizontal Correction],
press left or right button on the remote control to adjust.
Vertical Correction
button to go to
->
[Projection