Advanced Operation; The Info Display - Sony KD-32NS200 E Bedienungsanleitung

Advanced Operation

The Info display

z
*After you have programmed a recording
you can put the TV into it's standby
mode, but do not switch off completely or
the recording will be cancelled. If you put
the TV into standby mode, the standby
indicator on the front of the TV flashes
green periodically to remind you a
recording has been programmed. Once
a programme has started recording, do
not change channels or switch to
analogue mode or the recording will be
cancelled.
**The 'Manual' feature only works if you
have connected your VCR to the AV3
socket i3/r3 on the rear of the TV.
14
Advanced Operation
This display gives you information both on the current programmes being shown
and on future programmes when available from the broadcaster (up to 24 hours
ahead). The Info display provides a brief description of the current programme, it's
channel number and the start and end times. The title of the next programme and
it's start and end times are displayed in a smaller box to the right of the current
programme's information.
1.
Press the button on the remote control to view the Info display. If the
display does not appear, press the DIGITAL/a button to switch to digital
mode then press the
2. Use the B and b buttons to move around the display.
The Coloured buttons give you access to further options:
RED button: When pressed a pop-up menu allows you to change the
languages for the subtitles (when available). Press the V
or v button to select the language required, then press the
OK button to confirm.
GREEN button: When pressed a pop-up menu allows you to select the
language in which you wish to hear the broadcast (when
available). Press the V or v button to select the language
required, then press the OK button to confirm.
YELLOW button: Allows you to record a programme from the Info display, or
set a programme to automatically appear on screen when
it starts. Press the B or b button to select future
programmes from the Info display, then press the
YELLOW button to display the 'Timers' pop-up menu. You
can now choose from a)Record b)Wakeup or c)Manual
a) Record*
b) Wakeup*
c) Manual**
BLUE button: Press to display the Main Menu (see next page).
button to view the Info display.
Highlight 'Record' and press OK to
automatically set you VCR to record the
selected programme (this will only work if
your VCR has the Smartlink facility and is
connected to the AV3 socket i3/r3 on
the rear of this TV).
Highlight 'Wakeup' and press OK if you
wish the future programme you selected
to appear on screen when transmission
begins.
Highlight 'Manual' and press OK if you
wish the TV to output a channel to your
VCR for recording. The display shown on
the left appears. Press the V or v button
to set the day of recording, then press the
b button to move to the start time. Repeat
this procedure to set the start and stop
times and the channel number, then
press the OK button to store and return to
the Info menu. Press the
remove the Info menu from the screen.
Unless you have a Smartlink VCR, you
must now set the timer recording function
of your VCR to switch on and off to
correspond with the programme you have
stored for recording.
button to