Information codes
If the oven fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code
Description
The temperature sensor is open.
C-20
The temperature sensor is short.
If there is no communication
C-F0
between the main and sub
MICOM.
Only occurs when EEPROM Read
C-F1
or Write is not working.
This code appears when the
oven temperature high.
In case the temperature rises
C-21
over the limit temperature
during operation of each mode.
(Fire sensed.)
C-F2
The touch key is malfunction.
C-d0
Action
Unplug the power cord of
the oven, and contact a local
Samsung service centre.
Unplug the power cord for
cooling enough time, and restart
the microwave oven.
Stop the oven and then try
again.
Unplug the power cord for
cooling enough time, and clean
the button. (Dust, Water)
When appear same problem,
contact a local Samsung service
centre.
Technical specifications
SAMSUNG strives to improve its products at all times. Both the design
specifications and these user instructions are thus subject to change without
notice.
Power Source
Maximum power
Microwave
Power Consumption
Grill
Convection
Output Power
Operating Frequency
Magnetron
Cooling Method
Main unit
Dimensions
(W x H x D)
Built-in
Volume
Net
Weight
Shipping
* This product contains a light source of energy efficiency class <G>.
Overall Standby Power consumption (W)
(All network ports is "on" condition)
Period of time for the power management (min)
WiFi
Standby-mode Power Consumption (W)
Period of time for the power management (min)
Power consumption
Off mode
Period of time for the power management (min)
Data determined according to standard EN 50564 and Regulation (EC) No
1275/2008.
230 V ~ 50 Hz
2800 W
1650 W
2550 W
2500 W
100 W / 850 W (IEC-705)
2450 MHz
OM75P (21)
Cooling fan motor
595 X 456 X 570 mm
560 X 446 X 549 mm
50 liter
39.9 Kg
48.8 Kg
1.9 W
20 min.
1.9 W
20 min.
0.5 W
30 min.
English 51