Transferring Data To A Computer - Leica M Monochrom Anleitung

TRANSFERRING DATA TO A COMPUTER

The picture data on a memory card can be transferred to a
computer in two ways:
– Using the multifunction M hand grip (see p. 220)
This accessory has a USB 2.0 interface that allows the memory
card in the camera to be read out.
– Using a card scanner for SD/SDHC/SDXC cards
The camera is compatible with the following operating systems:
– Microsoft : Windows XP / Vista
® ®
– Apple Mac OS X (10.6 or higher)
® ®
Notes:
• Details of how to attach the hand grip, its functions and how to
use it can be found in its instructions.
• Connecting two or more devices to a computer or connecting
using a USB hub or extension cables can result in malfunctions.
/ 7 / 8
® ® ®
USB connection
Data can be transferred via USB cable using two different
standards. It thus takes account of the fact that some operating
systems for transferring picture data require a connection
complying with the PTP protocol.
In addition, it is always possible to operate the camera as an
external drive ("mass storage").
Setting the function
1. In the Main Menu (see p. 150/240) select
5, section ), and
SETUP
2. select or
PTP Mass Storage
Connecting and transferring data using the PTP protocol
If the camera is set to :
PTP
3. Use the USB cable (supplied with the hand grip) to connect the
USB socket on the multifunction M hand grip to a USB port on
the computer.
(page
USB mode
in the sub-menu.
EN
213