Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Dangers that may arise
from using the tool
Before each use, check the HAZET tool for full
functionality. Do not use the tool if its func-
tional efficiency cannot be ensured or if dam-
age is detected. If you use the tool despite full
functionality not being guaranteed, this poses
a risk of serious injury, health problems and
material damage.
• Do not use tools with a defective On/Off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts so as to guarantee its long-term
operational safety.
• Do not remove safety devices and/or hous-
ing parts.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect condition.
• For safety reasons, any modification to
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] info@hazet.de
2
For your safety
Immer persönliche Schutzausrüstung tragen!
HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!
Wear working gloves
and safety glasses.
Pneumatic tools can disperse chips,
dust and other abraded particles
at high speed which may result in
severe eye injuries. Compressed
air is dangerous. The air flow may
cause harm to sensitive parts of the
body like eyes, ears, etc. Dust and
objects being raised by the air flow
may cause injuries.
Wear hearing protection.
Long exposure to the working
noise of pneumatic tools may
result in permanent hearing loss.
Wear a face mask or breathing
protection.
Breathing in the vapours of
some materials like adhesives
and chemicals containing tar
can, over a prolonged period,
cause serious harm.
Wear tight-fitting
protective clothing.
Tools with moving parts can
get caught in your hair, clothes,
jewellery or other loose objects,
which can lead to serious injury.
Never wear clothing that is too loose
and/or clothing with bands or loops,
etc. which may get caught in the
moving parts of the tool. During the
work, take off jewellery, watches,
identification tags, bracelets,
necklaces, etc. that could get
caught in the tool. Never touch the
moving parts of a tool. Long hair
should be tied back or covered.
Keep children away from pneumatic tools.
Unattended tools or tools that are connected
to the compressed air supply may be used by
unauthorised persons and could cause injury to
them or to other persons.
13
Werbung
