Timer Clock; Manual Operation; Switching Clock - ETNA A3405 Anleitung

Timer clock

The timer clock can be used to switch off the oven
after the set time has elapsed.

Manual operation

1 Turn the timing switch to the left to the
position .
2 Select a temperature and a cooking function.
3 Set the selectors in position '0' to switch off
the oven.
Using the timer switch
Allows cooking during a pre-established time.
To do this:
1 Select a function and a cooking temperature.
2 Turn the timer control clockwise as far as
the position '120 minutes' and then turn it
backwards to the required cooking period.
3 When the time has finished, there will be an
acoustic signal and the oven will stop heating.
4 Set the selectors in position '0' to switch off
the oven.

Switching clock

The switching clock displays the current time. The
switching clock can also be used to switch off the
oven after the set time has elapsed.
Setting the time of day
Pull and turn the clock control (A) at the same time
in counter - clockwise direction until the clock hands
mark the correct time.
Manual operation
1 Turn the clock control (A) in counter –
clockwise direction until you see 'I' in the
display.
2 Select a temperature and a cooking function.
3 Set the selectors in position '0' to switch off
the oven.
Programming Cooking Time
1 Turn the clock control (A) in counter –
clockwise direction until the desired cooking
time in minutes is reached.
2 Select a cooking function and temperature.
3 When the set time ends, the oven will turn off
and an alarm will sound.
4 To turn off the alarm, turn the clock control in
counter - clockwise direction until you see '0'
in the display.
5 Set the selectors in position '0' to switch off
the oven.
A