cecotec 04201 Bedienungsanleitung Seite 15

1. Wash and condition your hair as usually.
2. Dry hair excess water with a towel and brush it.
3. Install the desired accessory (concentrator or diffuser) to the hair dryer's front part.
4. Connect the device to a power supply.
5. Set the desired heating level.
6. Set the desired speed.
7. Once you have finished using the device, switch it off and unplug it from the power
supply.
8. Allow it to cool down before cleaning or storing it.
Warning: If the product suffers overheating, it will automatically turn off. In this case, unplug
it from the power supply and allow it to cool down for a few minutes. Before turning it back
on, make sure there are no fluffs, hair or other objects blocking the grid or air inlet.
Tips:
• The diffuser is designed to dry straight and curly hairs.
• In order to increase hair's natural volume and to enhance curls, keep the device in an
upright position while operating it. (Figure 2).
• If you want to add volume from the roots, introduce the diffuser's tips in your hair and, as
they touch your scalp, move the appliance performing circles repeatedly for heat to be
distributed. (Figure 1).
Warning: Hairsprays contain flammable materials, therefore, do not use them at the same
time as the appliance.
04201_Bamba_5200_IoniCare_Aura_Black__Manual_YV01190617.indd 15 04201_Bamba_5200_IoniCare_Aura_Black__Manual_YV01190617.indd 15
Fig 1
ENGLISH
Fig 2
AURA BLACK 15
21/2/20 9:11 21/2/20 9:11