Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PARTS DESCRIPTION
LED-Screen
Temperature check / Bluetooth Reset
Fan | Channel Select
CCT / HSI / FX Mode Select
Power Switch
Power Switch
Adjustment Knob
Power Socket
DMX Input | Output (RJ45)
Umbrella Socket
Fixing Screw for Umbrella Socket
Tilt Adjusting Screw
U-holder
Fixing Screw for 16mm (5/8") Spigot
Spigot connection hole
Handle
Release knob for S-Bajonet
COB LED Light Source
S-Bajonet holes
Ventilation Slots
FUNCTIONS & OPERATION
Temperature check / Bluetooth Reset
Shortly press to check the working temperature. Long press to reset the bluetooth
connection.
Cooling fan / Channel Selection
1. Shortly presst
Note: When the cooling fan is switched off, the indensity is allowed to dimmer max to
30%.
2. Long press
to allow the access to 2.4G remote control, wheel the knob to
select the address 01 -99.
CCT / HSI / FX Control Mode
Shortly press
to switch between CCT and HSI control.
1. In the CCT mode, shortly press the knob to switch to control between dimmer and
color temperature and turn the knob to change the color temperature from 2700K
to 6500K or change intensity from 0 % to 100 %.
2. In the CCT mode, long press the knob to allow access to FX control mode. Shortly
press the knob to switch control of special effects x12, flash speed from 1 to 9, and
dimmer from 0 % to 100 %.
Wheel the knob to change the number.
Long press to exit from the FX control.
*not included
to switch on or off the coo ling fan.
7
GB
Werbung
