Operating Determinations; Description; Features - Omnitronic ZD-250 Bedienungsanleitung

There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

OPERATING DETERMINATIONS

This device is a professional zone distributor for distributing the incoming audio-signals to five zones. This
product is allowed to be operated with an alternating current of 220-250 V AC, 50 Hz and was designed for
indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not operate the device in extremely hot (more than 30° C) or extremely cold (less than 5° C)
surroundings. Keep away from direct insulation (particularly in cars) and heaters.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

DESCRIPTION

Features

Practical distributor
Extends every mixer in the line-sector • XLR-inputs for Line 1 and 2 • Level-control per zone • Five zone-
outputs via XLR-sockets • Every zone can individually be switched to mono • LED-display of signal input and
mono/stereo mode • 19"-dimensions with 1 u
The OMNITRONIC ZD-250 is designed for professional application. The inputs and outputs are located on
the rear panel, the gain controls on the front panel.
The OMNITRONIC ZD-250 is equipped with XLR input and output connectors.
12/15 10304110_V_1_0.DOC