Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Reactor tube
2.
Injector
3.
Injector pump
4.
Shut-off valve
5.
Ozone addition
6.
Drain pipe D 75
7.
Water drain D 110
8.
Foam cup
9.
Lid
10. Air supply regulating tap
11. Air pipe
12. Return tap
13. Shut-off valve
14. Inlet
15. Drain cock foam cup
16. Drain pump
17. Residual discharge skimmer
18. Ventilation
Available spare parts: Please refer to www.aqua-medic.de.
5. Principle of operation
The aquarium water is pumped to the skimmer using a separate pump (not included) which should have a
capacity of approx. 7,500 - 15,000 litres/hour. Inlet and outlet ports are arranged that way that the air bubbles
have the maximum contact time in the counter-current.
The venturi pump draws water from the skimmer and mixes it with air in the venturi nozzle. The air/water
mixture is pumped back into the skimmer. The treated water flows out of the bottom of the skimmer and is
pumped through the outlet pipe positioned outside the skimmer, back into the aquarium or filter sump.
6. Start-up
-
Check that the sealing rings for the unions are in place.
-
We recommend a pump with a capacity of 8,000 to 15,000 l/h (2,113 – 3,963 gph) for the water supply.
6
Werbung
