bürkert 6212 Bedienungsanleitung Seite 3

note!
Electrostatic sensitive components / modules!
The device contains electronic components which react
sensitively to electrostatic discharge (ESD). Contact with
electrostatically charged persons or objects is hazardous
to these components. In the worst case scenario, they
will be destroyed immediately or will fail after start-up.
• Observe the requirements in accordance with EN
61340-5-1 and 5-2 to minimise or avoid the possibility of
damage caused by sudden electrostatic discharge!
• Also ensure that you do not touch the electronic compo-
nents when the power supply voltage is present!
Failure to observe this operating manual and its oper-
ating instructions as well as unauthorized tampering with
the device release us from any liability and also invalidate
the warranty covering the devices and accessories!
english
8
5.3. Warranty
This document contains no promise of guarantee. Please refer
to our general terms of sales and delivery. The warranty is only
valid if the Type 6212 is used as intended in accordance with
the specified application conditions.
The warranty extends only to defects in the Type
6212 and its components.
We accept no liability for any kind of collateral
damage which could occur due to failure or mal-
function of the device.
5.4. approvals
The approval rating on the Bürkert labels concerns to Bürkert
products.
Devices that carry the e1 marking have been approved by
the Federal Office for Motorized Transport under the type
approval number
e1*72/245*2006/96*5791*00
and will be brought into circulation with the indicated approval
designation
english
10
5. general infOrmaTiOn
5.1. scope of supply
Check immediately upon receipt of the delivery that the con-
tents are not damaged and that the type and scope agree
with the delivery note and packing list.
If there are any discrepancies, please contact us immediately.
5.2. contact addresses
germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
international
Contact addresses can be found on the final pages of the
printed operating instructions.
And also on the Internet at:
www.burkert.com Bürkert
You can obtain an excerpt from the type approval from the
address below
Bürkert Werke GmbH & Co KG
Zulassungsbeauftragter
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
5.5. information on the internet
The operating instructions and data sheets for Type 6212
can be found on the Internet at:
www.burkert.com Documentation
Type 6212
Company Locations
english
9
Type 6212
english
11