DELTA DORE Tybox 5101 BK Schnellstartanleitung Seite 5

INSTALLATION
1. Installing the transmitter
1.1 Location
The thermostat can be mounted on the wall or
placed on a piece of furniture in a room whose
temperature is representative of the location's
average temperature, with a recommended
height of 1.5 m, and it should also be nowhere
near any heat sources (fireworks, sunlight, etc.) or
air flows (window, door, etc.).
IMPORTANT: Do not install the thermostat on an
external wall or with an
unheated room (e.g. garage, etc.)
1.2 Wall mounting
❶ Remove the front panel.
❷ Secure the thermostat to the surface using
suitable screws.
❸ Insert the batteries
WARNING: make sure you insert the batteries
facing the right way and that they are the right
type (no lithium batteries).
❹ Replace the front panel.
1.3 Mounting on a base
❶ Remove the front panel.
❷ Insert the batteries
WARNING: make sure you insert the batteries
facing the right way and that they are the right
type (no lithium batteries).
❸ Replace the front panel.
❹ Insert the base into the back of the
thermostat and place the device in the desire
location (on a flat, non-metallic surface).
> 20 cm
Wall mounting
2 x 1,5V - AAA LR03
Click
Click
mode mode
mode
mode
~1,50 m
Mounting on a base
2 x 1,5V - AAA LR03
Click
Click
3