Resetting The Unit; Mounting The Unit In A Japanese Car; Fuse Replacement - Sony WX-900BT Bedienungsanleitung

2
Mount the unit onto the bracket .
Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.

Mounting the unit in a Japanese car

You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
to dashboard/center console

Bracket
Existing parts supplied
with your car
When mounting this unit to the preinstalled
brackets of your car, use the supplied screws  in
the appropriate screw holes, based on your car: T
for TOYOTA, M for MITSUBISHI and N for NISSAN.
Note
To prevent malfunction, install only with the supplied
screws .


Bracket

Resetting the unit

For details, see "Resetting the unit" (page 6).

Fuse replacement

When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Fuse (10 A)
31
GB