Futurelight PRO Slim PAR-12 QCL RGBW/RGBA Bedienungsanleitung Seite 26

Setting LED colors (0 – 100%) / strobe effect
When the display shows U, you can select the dimmer itensity of the LED colors from 0 to 100 % (0-255) and
the desired strobe speed from 1 to 20 (increasing speed).
Please see the following table.
Mode: Value:
R 0 - 255
G
0 - 255
b 0 - 255
W 0 – 255
or
A 0 - 255
S 1 - 20
Setting dimmer speed (step response)
Press the MODE button until the display shows DIM. Press the ENTER button. You can select OFF / DIM1 /
DIM2 oder DIM3 (decreasing speed) via the UP or DOWN buttons. Confirm your choice by pressing ENTER.
Mode:
DIM
Setting solid colors
When the display shows C, you can select the desired solid color. Please see the following table.
Mode:
C
Setting DMX Channel Mode
Mode:
CHA
Setting the DMX starting address:
Press the MODE button after selecting the DMX Channel Mode. You can adjust the desired DMX starting
address by pressing UP or DOWN.
Mode:
Addr d 1 - d512
Red (0-100%)
Green (0-100%)
Blue (0-100%)
White (0-100%) (item no. 51842550 + 51842575)
Amber (0-100%) (item no. 51842555 + 51842580)
Strobe effect with increasing speed
Value:
OFF
DIM1
DIM2
DIM3
Value:
C-01
C-02
C-03
C-04
C-05
C-06
C-07
C-08
C-09
C-10
C-11
C-12
C-13 Green + Blue + White or Amber
C-14 Red + Green + White or Amber
C-15 Red + Green + Blue + White or Amber
Value:
10CH
6CH
4CH
Value:
Function:
Function:
Red
Green
Blue
White or Amber
Red + Green
Red + Blue
Green + Blue
Red + Green + Blue
Red + White or Amber
Blue + White or Amber
Green + White or Amber
Red + Blue + White or Amber
26/31 00070049.DOC, Version 1.1