Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CN 4100
CN 4100 Controller Product Information
Compact Operating Instructions
Original instructions
1
Notes on Safety and Product Conformity
Manufacturer
Siemens AG
Digital Industries
Process Automation
DE-76181 Karlsruhe
DEUTSCHLAND / GERMANY
Function
SIMATIC products control, regulate and monitor applications in automation systems, for example in the field of industrial
automation technology and process engineering.
2
Intended use
Intended use
Use SIMATIC products only in industrial applications.
The product may be operated only by personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety information. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products.
WARNING
Intended use
SIMATIC products are intended for automation of machine plants, process control and process engineering. For the
intended area of application of the respective product (e.g. ambient conditions, possible use in safety-critical systems), refer
to the associated Documentation (https://support.industry.siemens.com/cs/de/de/view/109802251).
If third-party products and components are used, these have to be recommended or approved by Siemens.
Proper transport, proper storage, setup, assembly/disassembly, installation, commissioning, operation, maintenance and
decommissioning are required to ensure that the product and its accessories operate safely and without any problems.
Non-observance may result in death or serious physical injury.
Note the information in the relevant Documentation (https://support.industry.siemens.com/cs/de/de/view/109802251).
Observe the ambient conditions for intended operation as described in the "Technical specifications" section of the system
and equipment manuals.
8
© Siemens AG 2023. All rights reserved
A5E52536517-AA, 02/2023
Werbung
