Brita mypure P1 Gebrauchsanleitung Seite 9

3.5 Step 5: Inserting the filter cartridge (see fig. 8)
A Remove protective strap (1). (see fig. 8)
B Insert the filter cartridge (4) vertically into the filter head (5).
Please make sure the flush hose of the filter head is at the
o utside.
C Turn the locking handle (3) until you feel it engages.
2.
3.
5.
1.
4.
(fig. 8)
The filter cartridge can only be inserted when the locking
!
handle is open.
Make sure that the filter cartridge is positioned correctly.
3.6 Step 6 (optional): Space-saving wall mount
!
A.
B.
A Attach the wall mount in place using the two matching screws
B Engage the filter head (2) in the wall mount (1).
to install the cartridge under the sink
(see fig. 9)
During assembly, note the installation dimensions, bending
radii of the hoses and dimensions of the accessories. The
system can be operated vertically and horizontally. When
using the wall mount, install vertically only!
1.
2.
3.
4.
(fig. 9)
and use two wall plugs, if necessary, depending on the type of
wall.
Please use the fixation holes (4).
9
ENGLISH