Care And Cleaning; Cleaning The Appliance - Gastroback Latté Art Milchaufschäumer Advanced Bedienungsanleitung

The appliance suddenly
stops.

CARE AND CLEANING

WARNING: Always ensure that the appliance and any parts and accessories of it are out of
reach of young children. This holds especially for the frothing discs that could
be swallowed by young children, thus causing risk of suffocation.
Always unplug the appliance, before cleaning. Even shortly after operation, the jug can be
very hot. Ensure that the jug cooled down before cleaning.
Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any corrosive
chemicals (e.g. bleach) for cleaning the appliance or any parts of it, to avoid damage to the
surfaces. Do not use any hard or sharp-edged objects for cleaning. Do not immerse the power
base or power cord in water or any other liquid. Do not spill or drip any liquids on the power
base, or on the power cord to avoid risk of fire and electric shock. Do not use violence!
Do not let any food dry up on the appliance or any parts of it to prevent accumulation of
baked-on foods. Always clean the appliance after each use according to the following inst-
ructions.

Cleaning the Appliance

Note: Only the jug, lid, measuring cup and frothing discs can be washed in the automatic
dishwasher (top rack only). Ensure that the frothing disc will not fall down into the dishwater
pan of the dishwasher.
CAUTION: Do not place the power base or power cord in an automatic
dishwasher.
1. Always unplug the appliance, before cleaning or moving the appliance.
2. Completely empty the jug. You can pour out the liquid via the spout. It is best to use a
wooden or plastic spoon with extra-long handle for taking out the froth.
3. Rinse the jug with cold tap water. Thereafter take out the frothing disc.
4. Wash the jug, lid, measuring cap and frothing disc in warm soapy water and rinse tho-
roughly.
Note: The seal on the lid can be removed and washed separately. However, do not use any
hard or sharp-edged objects for removing and cleaning the seal to avoid damage to lid and
seal.
Power failure.
The overheat protection is
active.
The thermal cut-out is active.
37
• Ensure that the power outlet
is live.
• Unplug the appliance and
wait for the appliance to cool
down (approx. 5 minutes).
Thereafter you can continue
working as usual.
• Unplug the appliance and
send the appliance to an autho-
rized service centre for repair.