Learning Resources LER 6900 Handbuch Seite 3

CLOCK
To set the CLOCK:
1. Press MENU to scroll through: CLOCK, TIMER,
AUTO TIMER.
2. When CLOCK appears on screen, press ENTER.
◄►
3. Use the ARROW
(military) time, then press ENTER.
◄►
4. Use the ARROW
ENTER. (note: continue pressing the
from AM to PM)
◄►
5. Use the ARROW
ENTER to confirm. The clock will start running.
TIMER
(input the exact amount of time you want each color section to
light up)
To set the TIMER:
1. Press MENU to scroll through: CLOCK, TIMER, AUTO TIMER.
2. When TIMER appears on screen, press ENTER to set or
change the time. (Note: if you already set the timer and you
just want to start it, press START).
3. Screen shows: GREEN and the green section will
light up.
• To input the amount of time you want the GREEN light to
be lit up: press ENTER to scroll forward to hours, minutes,
or seconds (press MENU to go backward).
• Use the ARROW buttons to input the hours, minutes, and
seconds. Press ENTER when you are done.
4. Repeat the above steps for yellow and red lights.
5. Screen will show TIMER with the total amount of time you
input.
6. Press START to start the timer OR press MENU to return to
digital clock mode.
7. To STOP timer, press and hold the MENU button.
4
buttons to choose 12 (standard) or 24
buttons to set the hours, then press
◄►
buttons to change
buttons to set the minutes, then press
AUTO TIMER
(input the total amount of time and the green light will
automatically be on for 80% of that time, the yellow light for
15%, and the red light for 5%.
To set AUTO TIMER:
1. Press MENU to scroll through: CLOCK, TIMER, AUTO TIMER.
2. When AUTO TIMER appears on screen, press ENTER to set or
change the time. (Note: if you already set the auto timer and
you just want to start it, press START).
3. Screen shows: TOTAL TIME.
• To input the total amount of time: press ENTER to scroll
forward to hours, minutes, or seconds (press MENU to go
backward).
◄►
• Use the ARROW buttons to input the amount of
hours, minutes, and seconds. Press ENTER when you
are done.
4. Screen will show AUTO TIMER with the amount of time you
input.
5. Press START to start the timer OR press MENU to return to
digital clock mode.
6. To STOP the timer, press and hold the MENU button.
STARTING THE TIMER
1. Once you have set the timer, press MENU until TIMER or
AUTO TIMER appears on screen.
2. Press the START button to start the timer.
3. To stop the timer at any point, press and hold the MENU
button.
4. While the timer is running, you can press START to display
how much time is remaining in the lit section.Press START
again to return to total time remaining.
USING AN ADAPTER
Important note: When using an adapter (LER 6989, sold
separately at LearningResources.com), unplug the adapter from
the Time Tracker first, before unplugging the adapter from the
®
wall. Unplugging the adapter from the wall first will reset the
unit and your programming will be lost.
5