LENCO LS-470 Bedienungsanleitung Seite 17

1.2. Place the record on the felt mat so that the center hole aligns
with the spindle.
2. Turntable Operation
Sufficiently lower the volume of the amplifier and speakers first.
2.1. Connect the included power adapter to the turntable, power on
this unit by the power switch at the back side. Turn the power&
volume knob to turn on this unit. The indicator will light in red.
2.2. Remove the stylus protector from the stylus.
2.3. Place the record on the slip mat.
2.4. Switch the function knob to choose 33 or 45 RPM speeds
according to the type of record.
2.5. Unlock the tonearm clip and set the tonearm lift lever to the up
position.
2.6. Position the tonearm over the desired location (groove) on the
record. The platter will start turning automatically.
2.7. Carefully lower the tonearm on the record by setting the
tonearm lift lever to the down position.
2.8. Turn up the volume of the turntable as needed.
2.9. When you are finished playing the record, raise the tonearm,
return it to rest on the arm clip and press the ON/OFF switch at
the back side to turn off the turntable.
17