Sonoff L1 Benutzerhandbuch Seite 5

7. Tap "+" and select "Quick Pairing", then operate following the
prompt on the app.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try "Compatible Pairing Mode" to
pair.
Long press the "on" button on the remote controller for 5s until the device "flashes"
•
and release. Long press this button for 5s again until the device status changes from
"flashing" to quick flashing". Then the device enters the Compatible Pairing Mode.
Tap "+" and select "Compatible Pairing Mode" on APP.
•
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go
back to eWeLink APP and tap "Next". Be patient until pairing completes.
Specifications
LED Light Strips
Model:
Input Voltage
Luminous Flux
Beam Angle
Working Humidity
Material
Light Decay
LED QTY
Life expectancy
Operating Temperature
Protect Range
L1-2M/L1-5M/L1 Lite-5M-EU
L1 Lite-5M-US
DC 12V
≥ 300 lumens/m
L1:140° L1 Lite:120°
≦95%
FPCB
Less than 3% after 1000
hours constant work
30 LEDs/m
>25000 hours
-15°C~50°c
L1: IP65 L1 Lite: IP20
5