Sony Mavigraph UP-1800EPM Gebrauchsanweisung Seite 73

4 Select MONI ADJ by pressing the A or v button.
MEM CLR: PUSH [>]
SIG ADJ : PUSH [>]
MONI ADJ =: PUSH [>]
MONI ADJ
PUSH [>]
Press the « or v button until MON! ADJ
Move the cursor to MONI ADJ by
appears.
pressing the ~ or v button.
5 Press the > button.
The following screen appears.
MONITOR AQJUST
MONI RED
MONI BLUE : tens
CHECK : PUSH [>]
DISPLAY: OFF/ON MONI RED
MONITOR : E TO E/ THRU
SYNC ON G : OFF/ON
Part of the MONITOR ADJUST sub menu
MONITOR ADJUST sub menu
6 Select MONITOR by pressing the « or v button.
MONITOR. ADJUST ne MONITOR
ae <E TO E>THRU
MONI BLUE :
DISPLAY : OFF/ON
ONITOR — : E TO E/ THRU
SYNC ON G : OFF/ON Press the « or v button until MONITOR
appears.
Move the cursor to MONITOR by
pressing the « or v button.
7 Select THRU by pressing the < or > button.
MONITOR :E TO
SYNC ON G : OFF/ON
Switch to green.
8 Press the MENU button.
The regular screen appears. ;
The image of the signal directly from the signal source, which does not pass
through the printer circuit, is displayed on the video monitor.
When screen display appears on the video monitor, the memory image is
displayed on the monitor. Display the image from the video equipment on the
video monitor by pressing the SOURCE/MEMORY button.
9 Adjust the color of the video monitor by using the monitor controls.
Installation and Adjustment | 71
TT