Troubleshooting - Electrolux IG2085SN Benutzerinformation

3. Clean the appliance and all
accessories.
4. Leave the door/doors open to prevent
unpleasant smells.

7. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
The appliance does not op-
erate.
The appliance is noisy.
Audible or visual alarm is
on.
A symbol or
is shown instead of num-
bers on the Temperature
Display.
The lamp does not work.
Possible cause
The appliance is switched
off.
The mains plug is not
connected to the mains
socket correctly.
There is no voltage in the
mains socket.
The appliance is not sup-
ported properly.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
The temperature in the
appliance is too high.
The door is left open.
The temperature in the
appliance is too high.
Temperature sensor prob-
symbol
lem.
The lamp is in stand-by.
WARNING!
If you want to keep the
appliance switched on, ask
somebody to check it once in
a while to prevent the food
inside from spoiling in case of
a power failure.
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified electri-
cian.
Check if the appliance stands
stable.
Refer to "Door open alarm".
Refer to "Door open alarm".
Close the door.
Contact a qualified electrician
or contact the nearest Au-
thorised Service Centre.
Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
Close and open the door.
ENGLISH 57